To attach the Stripe M2 credit card reader to your handheld device using the included 3M Dual Lock adhesive strips, follow these steps:
Clean the Surfaces:
- Make sure both the back of the Stripe m2 reader and the area on your handheld device where you'll be attaching the reader are clean and dry. Use a lint-free cloth with some rubbing alcohol to remove any dust or grease. Let it dry completely.
Prepare the Adhesive Strips:
- Take the 3M Dual Lock adhesive strips from the package. You'll find two sets of strips to use.
Attach the Strips to the Stripe m2 Reader:
- Stick one side of the Dual Lock strips to the back of the Stripe m2 reader. Press firmly to ensure it adheres well.
Attach the Strips to the Handheld Device:
- Stick the corresponding side of the Dual Lock strips to the area on your handheld device where you want the reader to be attached. Again, press firmly to ensure a strong bond.
Connect the Reader:
- Align the Stripe m2 reader with the adhesive strips on your handheld device. Press the reader firmly against the strips on your handheld, making sure the strips lock together securely.
Check the Fit:
- Ensure the Stripe m2 reader is firmly attached and there is no wobbling. Test the connection by gently tugging on the reader to make sure it’s securely affixed.
Finalize Setup:
- Make any necessary adjustments to ensure the reader is positioned for ease of use. Ensure that any ports or buttons on your handheld are still accessible and not obstructed
This method should provide a strong and secure attachment, freeing up your hands and making transactions smoother. If you encounter any issues or need further assistance, feel free to ask!
